Pre-Waxed Cotton Candle Wicks with Metal Tabs — 20cm / 7.87in, 100 Pack

Details

• Quantity: 100 wicks per pack
• Length: 20cm / 7.87in — suited to containers up to approximately 16–17cm (6.3–6.7in) deep after trimming
• Material: 100% cotton core, pre-waxed coating
• Burn quality: low-smoke cotton core for a cleaner burn
• Base tab: metal sustainer tab pre-attached — anchors the wick to the base of the container
• Wax compatibility: soy wax, coconut wax, paraffin wax, beeswax, and blends
• Best for: tall glass jar candles, deep tin candles, and pillar molds

How to Use

1. Fix the metal tab to the base of your container using a wick sticker or a small dot of melted wax. Press firmly and allow to set.
2. Pull the wick upright and center using a wick centering bar or wooden stick rested across the top of the container.
3. Pour your melted wax slowly around the wick. Do not disturb until fully set.
4. Once the wax has fully cooled (2–4 hours), remove the centering bar and trim the wick to 5–7mm (¼ inch) before the first burn.

Frequently Asked Questions

How does this compare to your other pre-waxed wicks?
This is the 20cm length — the longest in our pre-waxed wick range, suited to taller containers. If you need shorter wicks, see our Candle Wicks collection for 2.5cm, 9cm, and 15cm options.

Do I need to pre-wax these before use?
No — these wicks come pre-waxed and are ready to use straight from the pack. The wax coating keeps the wick stiff and upright during pouring.

What is the ideal trim length before burning?
Trim to 5–7mm (approximately ¼ inch) before each burn. A wick that is too long produces a large flame, excess soot, and mushrooming at the tip.

Shop More Candle Making Supplies

Browse all Candle Wicks or browse all Candle Making Supplies.