Fast Cure Crystal Clear 1:1 Epoxy Resin Kit — 500ml + 500ml (1000ml Total)

Fast Cure Crystal Clear 1:1 Epoxy Resin Kit — 500ml + 500ml

A fast-curing, crystal clear epoxy resin in a 500ml Part A + 500ml Part B kit (1000ml total). Mixed at a 1:1 ratio by volume, this resin is designed for speed without sacrificing clarity — demolding in as little as 5 hours and reaching full hardness in 8 hours. With a 40-minute working time, you have room to add pigments, arrange inclusions, and fine-tune your pour before it sets.

See more See less

Formulated with No VOCs and low odor, this is one of the more skin- and workspace-friendly epoxy resins available — ideal for crafters working indoors. Non-flammable.

Key Features

Fast cure — demold in 5 hours; full hardness in 8 hours
Crystal clear finish — high optical clarity once cured
Resists yellowing — maintains clarity over time
Self-leveling — flows evenly into molds and over flat surfaces
No VOCs & low odor — safer for indoor use
Non-flammable
40-minute working time — enough time for detailed pours and inclusion placement
1:1 mix ratio — equal parts A and B by volume

What’s Included

500ml Part A (Epoxy Resin) — 17oz
500ml Part B (Epoxy Hardener) — 17oz
1000ml total mixed volume

Compatible Uses

Silicone mold casting (jewelry, pendants, keychains, coasters)
Encapsulating flowers, botanicals, and inclusions
Geode resin art and decorative trays
Coating and sealing artwork and surfaces
River table fills and shallow decorative pours

How to Use

Measure equal parts of Part A and Part B by volume (1:1 ratio).
Combine in a clean mixing cup and stir slowly for 3–5 minutes, scraping sides and bottom thoroughly. Avoid whipping air into the mixture.
Add pigments, mica powder, or alcohol inks after mixing and stir again briefly.
Pour into your mold or onto your surface. Use a heat gun or lighter to pop surface bubbles.
Allow to cure at room temperature (22–25°C / 72–77°F). Demold after 5 hours; full cure in 8 hours.
Wear nitrile gloves even with low-odor resin — uncured epoxy can still cause skin sensitivity.
Work in a warm environment — cold temperatures slow curing and can cause cloudiness.

How This Compares to Our Other Epoxy Resin

We stock two 1:1 crystal clear epoxy resin kits. This Fast Cure formula demoldes in 5 hours and fully cures in 8 hours — ideal when you want to turn projects around quickly. Our standard formula offers a longer 45-minute working time and a 24–72 hour full cure — better suited for complex layered pours where you need more time to work.

Frequently Asked Questions

How much resin do I get in total?
This kit includes 500ml of Part A and 500ml of Part B — 1000ml total mixed volume.

Can I add color to this resin?
Yes — compatible with mica powder pigments, liquid resin dyes, alcohol inks, and glitter. Add colorants after mixing Part A and Part B together. Browse our Resin Pigments & Dyes for compatible options.

Is ‘No VOCs’ the same as non-toxic?
No VOCs means this resin does not emit volatile organic compounds during cure, making it lower-risk for indoor use than many standard epoxy resins. Uncured resin can still cause skin and eye irritation — always wear gloves and avoid contact with skin.

Can I do multiple layers?
Yes — for layered pours, add the next layer while the first is still in a gel/tacky stage (approximately 3–4 hours) for best adhesion. If the first layer has fully cured, lightly sand before adding the next pour.

Is this resin food safe once cured?
This resin is not food safe and should not be used for items that will contact food or drink.